LearnSOLIDWORKS.comLearnSOLIDWORKS.com
  • Free SOLIDWORKS Videos
  • About
  • Contact
  • SOLIDWORKS courses
    • SOLIDWORKS Course overview
    • SOLIDWORKS Yacht course
    • SOLIDWORKS Chopper course
    • SOLIDWORKS Boeing 747 course
    • SOLIDWORKS Aston Martin course
    • SOLIDWORKS Tesla Roadster course
    • SOLIDWORKS Master Bundle (all courses in ONE bundle)
  • Free SOLIDWORKS Workshop

Disclaimer

Home Disclaimer

Disclaimer

The information contained on https://learnsolidworks.com website (the “Service”) is for general information purposes only.

Zuyderduyn Design assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall Zuyderduyn Design be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Zuyderduyn Design reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

Zuyderduyn Design Web Site Agreement

The LearnSOLIDWORKS.com Web Site (the “Site”) is an online information service provided by Zuyderduyn Design (“LearnSOLIDWORKS.com “), subject to your compliance with the terms and conditions set forth below.

PLEASE READ THIS DOCUMENT CAREFULLY BEFORE ACCESSING OR USING THE SITE. BY ACCESSING OR USING THE SITE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS SET FORTH BELOW. IF YOU DO NOT WISH TO BE BOUND BY THESE TERMS AND CONDITIONS, YOU MAY NOT ACCESS OR USE THE SITE. LearnSOLIDWORKS.com MAY MODIFY THIS AGREEMENT AT ANY TIME, AND SUCH MODIFICATIONS SHALL BE EFFECTIVE IMMEDIATELY UPON POSTING OF THE MODIFIED AGREEMENT ON THE SITE. YOU AGREE TO REVIEW THE AGREEMENT PERIODICALLY TO BE AWARE OF SUCH MODIFICATIONS AND YOUR CONTINUED ACCESS OR USE OF THE SITE SHALL BE DEEMED YOUR CONCLUSIVE ACCEPTANCE OF THE MODIFIED AGREEMENT.

1. Copyright, Licenses and Idea Submissions. The entire contents of the Site are protected by international copyright and trademark laws. The owner of the copyrights and trademarks are LearnSOLIDWORKS.com, its affiliates or other third party licensors.

YOU MAY NOT MODIFY, COPY, REPRODUCE, REPUBLISH, UPLOAD, POST, TRANSMIT, OR DISTRIBUTE, IN ANY MANNER, THE MATERIAL ON THE SITE, INCLUDING TEXT, GRAPHICS, CODE AND/OR SOFTWARE.

You may print and download portions of material from the different areas of the Site solely for your own non-commercial use provided that you agree not to change or delete any copyright or proprietary notices from the materials. You agree to grant to LearnSOLIDWORKS.com a non-exclusive, royalty-free, worldwide, perpetual license, with the right to sub-license, to reproduce, distribute, transmit, create derivative works of, publicly display and publicly perform any materials and other information (including, without limitation, ideas contained therein for new or improved products and services) you submit to any public areas of the Site (such as bulletin boards, forums and newsgroups) or by e-mail to LearnSOLIDWORKS.com by all means and in any media now known or hereafter developed.

You also grant to LearnSOLIDWORKS.com the right to use your name in connection with the submitted materials and other information as well as in connection with all advertising, marketing and promotional material related thereto. You agree that you shall have no recourse against LearnSOLIDWORKS.com for any alleged or actual infringement or misappropriation of any proprietary right in your communications to LearnSOLIDWORKS.com.

Publications, products, content or services referenced herein or on the Site are the exclusive trademarks or servicemarks of LearnSOLIDWORKS.com. Other product and company names mentioned in the Site may be the trademarks of their respective owners.

2. Use of the Site. You understand that, except for information, products or services clearly identified as being supplied by LearnSOLIDWORKS.com, LearnSOLIDWORKS.comdoes not operate, control or endorse any information, products or services on the Internet in any way. Except for LearnSOLIDWORKS.com- identified information, products or services, all information, products and services offered through the Site or on the Internet generally are offered by third parties, that are not affiliated with LearnSOLIDWORKS.com a. You also understand that LearnSOLIDWORKS.com cannot and does not guarantee or warrant that files available for downloading through the Site will be free of infection or viruses, worms, Trojan horses or other code that manifest contaminating or destructive properties. You are responsible for implementing sufficient procedures and checkpoints to satisfy your particular requirements for accuracy of data input and output, and for maintaining a means external to the Site for the reconstruction of any lost data.

YOU ASSUME TOTAL RESPONSIBILITY AND RISK FOR YOUR USE OF THE SITE AND THE INTERNET. LearnSOLIDWORKS.com PROVIDES THE SITE AND RELATED INFORMATION “AS IS” AND DOES NOT MAKE ANY EXPRESS OR IMPLIED WARRANTIES, REPRESENTATIONS OR ENDORSEMENTS WHATSOEVER (INCLUDING WITHOUT LIMITATION WARRANTIES OF TITLE OR NONINFRINGEMENT, OR THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) WITH REGARD TO THE SERVICE, ANY MERCHANDISE INFORMATION OR SERVICE PROVIDED THROUGH THE SERVICE OR ON THE INTERNET GENERALLY, AND LearnSOLIDWORKS.com SHALL NOT BE LIABLE FOR ANY COST OR DAMAGE ARISING EITHER DIRECTLY OR INDIRECTLY FROM ANY SUCH TRANSACTION. IT IS SOLELY YOUR RESPONSIBILITY TO EVALUATE THE ACCURACY, COMPLETENESS AND USEFULNESS OF ALL OPINIONS, ADVICE, SERVICES, MERCHANDISE AND OTHER INFORMATION PROVIDED THROUGH THE SERVICE OR ON THE INTERNET GENERALLY. LearnSOLIDWORKS.com DOES NOT WARRANT THAT THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE OR THAT DEFECTS IN THE SERVICE WILL BE CORRECTED.

YOU UNDERSTAND FURTHER THAT THE PURE NATURE OF THE INTERNET CONTAINS UNEDITED MATERIALS SOME OF WHICH ARE SEXUALLY EXPLICIT OR MAY BE OFFENSIVE TO YOU. YOUR ACCESS TO SUCH MATERIALS IS AT YOUR RISK. LearnSOLIDWORKS.com HAS NO CONTROL OVER AND ACCEPTS NO RESPONSIBILITY WHATSOEVER FOR SUCH MATERIALS.

LIMITATION OF LIABILITY

IN NO EVENT WILL LearnSOLIDWORKS.com BE LIABLE FOR (I) ANY INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF PROGRAMS OR INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SERVICE, OR ANY INFORMATION, OR TRANSACTIONS PROVIDED ON THE SERVICE, OR DOWNLOADED FROM THE SERVICE, OR ANY DELAY OF SUCH INFORMATION OR SERVICE. EVEN IF LearnSOLIDWORKS.com OR ITS AUTHORIZED REPRESENTATIVES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR (II) ANY CLAIM ATTRIBUTABLE TO ERRORS, OMISSIONS, OR OTHER INACCURACIES IN THE SERVICE AND/OR MATERIALS OR INFORMATION DOWNLOADED THROUGH THE SERVICE. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN SUCH STATES, LearnSOLIDWORKS.com LIABILITY IS LIMITED TO THE GREATEST EXTENT PERMITTED BY LAW.

LearnSOLIDWORKS.com makes no representations whatsoever about any other web site which you may access through this one or which may link to this Site. When you access a non-LearnSOLIDWORKS.com web site, please understand that it is independent from LearnSOLIDWORKS.com, and that LearnSOLIDWORKS.com has no control over the content on that web site. In addition, a link to a LearnSOLIDWORKS.com web site does not mean that LearnSOLIDWORKS.com endorses or accepts any responsibility for the content, or the use, of such web site.

3. Indemnification. You agree to indemnify, defend and hold harmless LearnSOLIDWORKS.com, its officers, directors, employees, agents, licensors, suppliers and any third party information providers to the Service from and against all losses, expenses, damages and costs, including reasonable attorneys’ fees, resulting from any violation of this Agreement (including negligent or wrongful conduct) by you or any other person accessing the Service.

4. Third Party Rights. The provisions of paragraphs 2 (Use of the Service), and 3 (Indemnification) are for the benefit of LearnSOLIDWORKS.com and its officers, directors, employees, agents, licensors, suppliers, and any third party information providers to the Service. Each of these individuals or entities shall have the right to assert and enforce those provisions directly against you on its own behalf.

5. Term; Termination. This Agreement may be terminated by either party without notice at any time for any reason. The provisions of paragraphs 1 (Copyright, Licenses and Idea Submissions), 2 (Use of the Service), 3 (Indemnification), 4 (Third Party Rights) and 6 (Miscellaneous) shall survive any termination of this Agreement.

6. Miscellaneous. This Agreement shall all be governed and construed in accordance with the laws of The Netherlands applicable to agreements made and to be performed in The Netherlands. You agree that any legal action or proceeding between LearnSOLIDWORKS.com and you for any purpose concerning this Agreement or the parties’ obligations hereunder shall be brought exclusively in a federal or state court of competent jurisdiction sitting in The Netherlands . Any cause of action or claim you may have with respect to the Service must be commenced within one (1) year after the claim or cause of action arises or such claim or cause of action is barred.

LearnSOLIDWORKS.com’s failure to insist upon or enforce strict performance of any provision of this Agreement shall not be construed as a waiver of any provision or right. Neither the course of conduct between the parties nor trade practice shall act to modify any provision of this Agreement. LearnSOLIDWORKS.com may assign its rights and duties under this Agreement to any party at any time without notice to you. Any rights not expressly granted herein are reserved.

Free SOLIDWORKS Workshop

It doesn’t need to take years to learn how to model (complex) products in SOLIDWORKS. You don’t need to labor over boring theory. Learning SOLIDWORKS can be faster, more fun, and easier than you thought.

Because I teach SOLIDWORKS by modeling real products such as an incredible Aston Martin, a 108 ft. SuperYacht, an American Chopper, and even an entire Boeing 747-8!

Sound good?

Click here to attend my free SOLIDWORKS Workshop!

Contact details

LearnSOLIDWORKS.com

Zuyderduyn Design
Goes
The Netherlands

KvK: 32154295
VAT-ID: NL001103448B95

info@learnsolidworks.com
www.learnsolidworks.com

Search

Information

Login Members Area
About
Contact
Change Billing Information
Request Quotation
Multiple Licenses
Affiliates
Joint Ventures
Disclaimer
Privacy Policy
Cookie Policy

SOLIDWORKS Solution Partner
© 2022 - LearnSOLIDWORKS.com - All rights reserved - SOLIDWORKS is a registered trademark of Dassault Systemes SolidWorks Corporation and not related to LearnSOLIDWORKS.com The brands "Aston Martin", "KLM" and "Boeing", are not affiliated with or endorsed by the original rights holders.

We are using cookies to give you the best experience on our website.

Learn more.

LearnSolidWorks logo
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.

3rd Party Cookies

This website uses Facebook to see which products you are viewing on our website. This way we can show you relevant advertisements on Facebook. Without these cookies we can’t send you custom offers and discount coupons on Facebook.

This cookie is coming from Facebook and will be saved for max 2 years.

Names: lu, xs, s, presence, act, c_user, csm, p, fr, datr

Facebook doesn’t share your information with 3th parties. Privacy statement


This website uses YouTube to display our SolidWorks video tutorials. Without these cookies we can’t send show you our free SolidWorks tutorials.

This cookie is coming from YouTube and will be saved for max 7 months.

Names: VISITOR_INFO1_LIVE and YSC

YouTube does share anonymous information with 3th parties. Privacy statement

Please enable Strictly Necessary Cookies first so that we can save your preferences!

Cookies Policy

More information about our Cookies Policy